Tread Settings-Two-Position MFWD Wheels-Late Model TractorWheel tread on MFWD axle can be adjusted by exchanging the wheels from side-to-side. The relationship of the wheels is as shown in the diagrams. IMPORTANT: After setting wheel spacing, tighten MFWD wheel disk-to-hub nuts to specification. Drive tractor 100 m (109 yd) and tighten again. Specification
|
|
| TWO-POSITION MFWD WHEELS TREAD WIDTH Centerline-to-Centerline |
||
|---|---|---|
| Tire Size | Wheel Position | |
| A | B | |
| 7.0-16 | 1078 mm (42.4 in.) | 1208 mm (47.6 in.) |
| 8.3-16 | 1077 mm (42.4 in.) | 1207 mm (47.5 in.) |
| 9.5-16 | 1100 mm (43.3 in.) | 1163 mm (45.8 in.) |
| 10.5/80-18 | 1190 mm (46.9 in.) | 1094 mm (43.1 in.) |
OUO1004,0001390 -19-20NOV03-1/1 |