DG14 Diagnostic Gauge — Essential Menus

    Automatic Exhaust Filter Cleaning

    To enable auto exhaust filter cleaning mode:

  1. Press home menu key on diagnostic gauge.
  2. Press arrow keys to scroll up or down to FUNCTION.
  3. Press check mark select key.
  4. Press arrow keys to scroll up or down to EXHAUST REGENERATION.
  5. Press check mark select key.
  6. Press arrow keys to scroll up or down to AUTOMATIC.
  7. Press check mark select key to enable auto exhaust filter cleaning.

    Manual/Parked Exhaust Filter Cleaning

    To request a manual/parked exhaust filter cleaning:

  1. Reduce engine speed to slow idle.
  2. Press home menu key on diagnostic gauge.
  3. Press arrow keys to scroll up or down to FUNCTION.
  4. Press check mark select key.
  5. Press arrow keys to scroll up or down to EXHAUST REGENERATION.
  6. Press check mark select key.
  7. Press arrow keys to scroll up or down to FORCED.
  8. Press check mark select key to request a manual/parked exhaust filter cleaning.
  9. Follow directions on display and ensure all conditions are met.
  10. Press check mark select key to CONFIRM all conditions are met.

    Disable Exhaust Filter Cleaning

    To disable the auto exhaust filter cleaning mode:

  1. Press home menu key on diagnostic gauge.
  2. Press arrow keys to scroll up or down to FUNCTION.
  3. Press check mark select key.
  4. Press arrow keys to scroll up or down to EXHAUST REGENERATION.
  5. Press check mark select key.
  6. Press arrow keys to scroll up or down to INHIBIT.
  7. Press check mark select key to disable exhaust filter cleaning.
  8. Press check mark select key to continue after the warning has been acknowledged.

    Fault Codes — Active

    To view active fault code information:

  1. Press home menu key on diagnostic gauge.
  2. Press arrow keys to scroll up or down to FUNCTION.
  3. Press check mark select key.
  4. Press arrow keys to scroll up or down to VIEW FAULT CODES.
  5. Press check mark select key.
  6. Press arrow keys to scroll up or down to ACTIVATE.
  7. Press check mark select key.
  8. Press arrow keys to scroll through available faults.

    Fault Codes — Stored

    To view stored fault code information:

  1. Press (home) menu key on diagnostic gauge.
  2. Press arrow keys to scroll up or down to FUNCTION.
  3. Press (check mark) select key.
  4. Press Arrow keys to scroll up or down to VIEW FAULT CODES.
  5. Press (check mark) select key.
  6. Press arrow keys to scroll up or down to STORED.
  7. Press (check mark) select key.
  8. Press Arrow keys to scroll through available faults.

BL90236,0000026-19-20210819