Using PIN Code

The default PIN code (0 0 0 0) can be used.

PIN code entry is required after the main switch is moved to ON position.

The product should be set to a user defined PIN code to protect the mower from being manipulated by unauthorized persons.

Entering PIN Code

1. Position mower within boundary wire area.

2. Push main switch to ON position.

3. Mower will Initialize.

   • User interface display will read Mower Initializing.
   • The Run LED light will flash red.
   
   

4. User interface display will read Enter Current PIN Code.

   1. Push Left and Right Arrow buttons to move blinking cursor through PIN code fields.

   2. Push Up and Down Arrow buttons to scroll through and select a value in each field.

   3. Set PIN code to 0 0 0 0.

5. Push Enter to Save PIN code.

   Valid PIN Code:

   1. User interface display will read PIN Code Valid.

   2. User interface display will read MOWER PAUSED.

   3. The Run LED light will flash green.

   Invalid PIN Code:

   1. User interface display will read PIN Code Invalid.

   2. Enter PIN code and push Enter button.

   3. After three attempts, the system will time out for 10 minutes before you can enter PIN code again.

   4. Contact your dealer if you are unable to enter valid PIN code.