Schedule Mowing

Schedule mowing when children and pets will not be around the area.

The mower should not run when irrigation is running. This is to protect sprinkler heads, eliminate pressured water on the mower, and increase traction while mowing. Allow time for grass to dry after irrigation before mowing.

For lawn health and longer machine life, schedule the mower to run no longer than required. Dealer installation will provide optimal schedule.

If the mower is scheduled for two blocks of time, it will mow both times.

1. Position mower within boundary wire area.

2. Push main switch to ON position.

3. Mower will initialize.

   • User interface display will read Mower Initializing.
   • The Run LED light will flash green.
   
   

4. User interface display will read Enter Current PIN Code.

5. Enter PIN code and push Enter to Save PIN code.

   • User interface will display informational message.
   
   

6. NOTE: The mower will default to the last Mow on Schedule (AUTO) Mode program used. Push Start to begin operating with the default.

   Push button next to desired mode to select Mow on Schedule (AUTO), Mow Now or Go Home.

7. Push Enter to choose selected option. Selected options will have bold text as you scroll through them.

Mow on Schedule (AUTO) Mode

Up to three schedules can be programmed into Mow on Schedule (AUTO) Mode (See Programming Mow on Schedule Mode).

1. Push button next to Schedule (AUTO) mode.

2. Push Start and mower will begin operating or go home if mowing is not scheduled. If mower is in charging station, it will stay there if mowing is not scheduled for that time.

Mow Now Mode

In Mow Now Mode, the mower will operate for up to 60 minutes or less if charging is required. Use this mode to mow inside separate boundary areas which do not have charging stations.

1. Push Go Mow Now mode button to select an option:

   • Charge Station Area if mower can access a charging station.
   • No Charge Station if mower cannot access a charging station because station is in a separate area.
   
   

2. Push Start and mower will begin operating.

Go Home Mode

Use Go Home Mode to send the mower to the charging station if children, pets or persons unfamiliar with the mower will be in the operating area. There are two options under Go Home Now.

1. Push Go Home mode to select an option.

   • Use Go Home Mode to send the mower to the charging station and resume mowing on the next scheduled day.
   • Use Go Home Mode to Go Home/Stay Home until the user elects to go back on schedule.
   
   

2. Push Start to send mower home to charging station.