Programming Mow On Schedule Mode

1. Push Menu.

   • User interface display will read Main Menu, with Setup, Scheduling, Launch Points and Utilities options.
   
   

2. Push Up and Down Arrows to select Scheduling and push Enter.

   • User interface display will read Schedule 1, Schedule 2 and Schedule 3.
   
   

3. Push Up and Down Arrows to select the Schedule you want to program and push Enter.

   • User interface display will read Schedule_ followed by three lines to activate days of the week and schedule two mow times per day.
   
   

4. Push Left and Right Arrows to move blinking cursor to first day of week you want to schedule a mow time for, and push Enter to activate that day.

   • The letter for an activated day will be bold.
   
   

   For easier programming use the ALL and ALT settings:

   • ALL Scheduling is for all days of the week.
   • ALT Scheduling is for alternate days of the week (Monday, Wednesday, Friday and Saturday).
   
   

5. Push Enter to move down to second line (T1) and set the time to mow on the activated day.

   1. Push Up and Down Arrows to scroll through the hours. The schedule is a 24 hour clock.

   2. Push Right Arrow to move blinking cursor to minutes position, and push Up and Down Arrows to scroll through 15 minute increments and select the time.

   3. Set mowing start time and end time.

   4. For serial numbers beginning 1SA1318 (MOWiT) or 1SA1312 (TANGO): when the battery becomes almost completely discharged (showing fault F20), it goes into standby mode. The realtime clock is powered for at least 24 hours.

6. Push Enter to move down to third line (T2) and repeat to set a second time to mow on that day.

   • If you do not want to set a second time, leave or return the third line default to None.
   
   

7. Push Enter to move back to the first line to activate additional days of the week and schedule mow times for those days.

8. Push Back to Save mow times and repeat from beginning to program two additional Schedules if needed.