Transporting Mower

1. Push main switch to OFF position.

2. 
   MXAL47274-UN-16APR13

   Lift mower by handle and turn to position as shown with mower blades facing away from your body.

---

Transporting in Vehicle

Secure the machine on or in the transporting vehicle so that the machine cannot move. Use approved load restraints such as tie down straps. Tie down straps are belt bands made of synthetic fibres, and incorporate hook ends and a tightening device. Approved tie down straps will have a label with load rating information and important details regarding application and use.

When the machine main power switch is off, the drive wheels are free to rotate. For loaded goods that can roll, it is recommended to use direct strapping with four tie downs. Secure the machine on its wheels so that it does not move during transportation.

If the rear wheels do move, the user interface will blink on and sounds (only for serial numbers beginning 1SA1112 (Tango) and 1SA1118 (MOWiT)) will occur.

Do not leave the mower in a vehicle with excessive heat.