Electrical Hazards
-
If the mower stops in water contact your dealer. The dealer
must disconnect the mower battery before moving the machine.
-
Avoid further damage by contacting your dealer before attempting
to move the mower if it becomes damaged by impact, entering water
or other accidents.
-
Install the charging station in a protected outdoor location.
-
Install the charging station power supply in an indoor location.
-
Only use the charging station and charging station power supply
which comes with your mower to charge the mower.
-
Check the charging station power supply regularly for wear or
damage. Contact your dealer for replacement.
-
Do not touch a damaged cord, or plug a damaged cord into an
outlet.
-
Do not attempt to remove the mower battery.
-
Connect the charging station power supply to a power source
which conforms with local standards and regulations. Consult an electrician.
Dealer installation of charging station and initial mower setup is
strongly recommended.
-
Disconnect power supply from power source before servicing or
cleaning components.
|
|
OUO2005,00004A2-19-20151110
|
|