Scheduled Mowing

MXT016599
MXT016599-UN-19NOV15

A - Homing Direction

B - Homing Direction

C - Homing

D - Launch Direction

E - Launch Direction

F - Yard Perimeter

G - Garden Settings

H - Advanced Garden Settings

I - Launch Points

J - Setup Assistant

K - Schedule

L - Corridor Docking

M - Alternating Homing Direction

N - Mower Settings

O - Mower Storage

P - Mower

Q - PIN Code Screen Lock

R - Sounds Contrast

S - Diagnostics

T - Warning (Fault) DTC

U - Information

V - Caution - External Safety Label

W - Caution - Vehicle Malfunction

X - Enter or Good Boundary Signal Indication

Y - Insufficient Information

Z - Pause

aa - Clean Up Pass

ab - Home

ac - Waiting

ad - Mow

ae - Mow Now

af - Blade

ag - Charging

ah - Start From Here

ai - Launch Alternate

Some icons appear in the user interface screen display. These icons represent specific mower navigation or operation actions. Travel directions given are as when viewed from the mower, moving forward.

Some abbreviations appear in the user interface screen display process descriptions. These abbreviations represent the specific mower navigation or operation processes described.

Robotic Mower Programming Abbreviations

CS

Charge Station

CUP

Clean-Up Pass

Dir

Direction

LP1

Launch Point

PIN

Personal Identification Number

YP

Yard Perimeter

Program and run the robotic mower on a schedule appropriate for the mowing area and season for best lawn health and longer machine life. Schedule the mower to run no longer than is required. Dealer installation provides optimal scheduling.

Do not schedule mower to run when children or pets are around the mowing area.

Do not schedule mowing during irrigation in order to protect sprinkler heads and to eliminate pressured water on the mower. Allow grass to dry after irrigation for improved mower traction.

  1. Position mower at the charging station.

  2. Push main switch to ON position.

  3. Mower goes through initializing routine.

    • User interface display shows Mower Initializing.
    • The Run LED light is solid green.

  4. User interface display shows Enter Current PIN Code.

  5. Enter PIN code.

  6. Press check mark (Enter) button.

  7. User interface shows informational message. Press Enter button to agree.

  8. NOTE: The mower defaults to the last Mow on Schedule (AUTO) Mode program used. Push Start to begin operating with the default.

    Select Mow on Schedule (AUTO), Go Mow Now, or Go Home by pushing button at desired mode.

    Mobile App: Schedule times can also be adjusted using the mobile app. In the mobile app, you can add a schedule template if you would like to save a typical schedule to use at another time.


Mow on Schedule (AUTO Mode)

Use Mow on Schedule (AUTO) mode for fully programmed mowing. Up to three separate mowing schedules can be programmed for different mowing conditions. Choose alternate programmed schedule to best suit current mowing conditions.

  1. Press STOP button at top of mower.

  2. Press Mow on Schedule button.

  3. NOTE: Only mowing programs with operating data entered appear.

    The screen shows a list of available mowing schedules. Use Left or Right arrow to highlight desired schedule.

  4. Confirm schedule selection by pressing Enter button.

  5. The screen displays programmed mower operation for chosen schedule. If this operation is not as desired, press Back button to return to schedule list.

  6. If displayed operation is correct, press Enter button to confirm.

  7. Execute Mow on Schedule command by pressing Start button. The mower begins operating under chosen mowing schedule at scheduled start time. If not at charging station, mower goes home if mowing is not scheduled.


Go Mow Now Mode

Operate the mower under Go Mow Now command to

  • Mow for a specific time from a specific point. The mower operates for up to 60 min. (less if charging is required).
  • Mow with or without a charge station.
  • Mow a clean-up pass with or without a charging station in the mowing area.
  • The mower will request after mowing in the charge station area whether you want to return to mowing on the schedule or “stop” and stay home. If you choose mow on the schedule, the mower will go out on the scheduled time.
  • When choosing without a charge station, enter the distance that the mower should travel for a complete clean up pass.

Go Home Mode

Mowing on a set schedule or Go Mow Now mode can be interrupted, and the mower sent home with options for resumption of mowing. Use the Go Home mode to send the mower to the charge station for situations such as:

  • Unusually dry turf conditions that make mowing on schedule temporarily unnecessary.
  • Rain is forecast during a scheduled mowing period.
  • Children, pets, or persons unfamiliar with the mower are in the operating area.

. There are two options under Go Home.

  • Stay Home sends mower to charge station until instructed to resume mowing.
  • Number of Days sends mower to charge station until selected number of calendar days have passed.

Enable Go Home

  1. Push the STOP button at the top of the mower to halt mowing operation.

  2. Push Go Home button.

  3. Use Left or Right arrows to highlight desired option to resume mowing from on-screen list.

Stay Home

  1. Highlight Stay Home.

  2. Confirm selection by pressing Enter.

  3. Execute Go Home command by pressing start.

Number of Days

  1. Highlight Number of Days.

  2. Confirm selection by pressing Enter.

  3. NOTE: Days until mowing resumes are calendar days, not scheduled mowing days. The default setting is one day.

    Use Up or Down arrows to select number of days to pass before mowing resumes.

  4. Confirm selected number of days by pressing Enter.

  5. Execute Go Home command by pressing start.


Setup Assistant

Setup Assistant provides access, through the User Interface, for setting of mower operation and navigation, mowing schedule, and mowing area. Through Setup Assistant you can change:

  • Mower settings
  • Schedule name
  • Cleanup pass setup
  • Perimeter distance
  • Launch Point setup and name
  • Schedule setup
  • Homing direction
  • Keep Out setup
  • Corridor docking

Mobile App: Boundary Following, Clean-Up Pass, Keep Out settings, and Launch Points can also be set or adjusted using the mobile app.

1 A number from 1 to 5 follows to designate a specific Launch Point.

OUO2005,00004A7-19-20151119