Changing Mower Settings on User Interface

Changing Launch Point Settings

MXT012352-UN-10DEC14

A - Stop Button

B - Menu Button

C - Right Arrow

1. Press STOP button (A) at top of mower. A Mower Stopped message replaces the Runtime (operating) screen display.

2. Display main menu by pressing user interface menu button (B). Press Enter.

3. Show Garden Settings options by pressing Right arrow (C). Press Enter.

4. Highlight Launch Point option by pressing Left or Right arrows. Press Enter (√).

5. NOTE: Only launch points with entered data are displayed.

   Highlight desired Launch Point. Press Enter.

6. NOTE: * indicates launch point being modified.

   
   MXT015203-UN-06AUG15

   
   MXT016432-UN-16NOV15

   D - Launch Direction

   E - Launch Direction

   F - Launch Point Value

   Launch Point variables and their current values are shown. Launch Point variables include Name, Launch Direction and Distance from charging station, and Boundary Following distance. Highlight Launch Point value (F) to be modified, and press Enter. Launch Direction option and default Launch Direction (D) are shown.

---




7. Change launch direction (E) by pressing Enter.

8. With Save highlighted, press Enter.

9. Highlight Boundary Following to change boundary following distance. Press Enter.

10. 
    MXT013241-UN-16DEC14

    Set boundary following offset, saving as an Exact or Variable distance.
    • Set Boundary Following for an Exact offset:
    
    

    1. Position icon (I) over desired boundary following offset by pressing Left or Right arrows. Press Enter.

    2. Highlight Exact and press Enter.

    3. With Save highlighted, press Enter.

    • NOTE: Variable boundary following can be set within a range of two increments from the wire.
      

      
      MXT013242-UN-12DEC14

      Set boundary following for a Variable offset:

    ---

    
    

    1. Position icon over desired minimum boundary following offset by pressing Left or Right arrows. Press Enter.

    2. Highlight Minimum and press enter.

    3. Move icon to maximum desired offset by pressing Right arrow. Press Enter.

    4. With Maximum highlighted, press Enter.

    ---

    
    

    5. 
       MXT013243-UN-12DEC14

       With Save highlighted, press Enter to save changes.

---




11. Change launch point name by highlighting Name menu option. Press Enter.

12. Highlight desired launch point naming option for address, custom, or standard name. Save option by pressing Enter.

    • NOTE: If naming by LP address, address elements are changed when changes are made to Launch Direction and Distance options.
      Change launch point name:
    
    

    1. Highlight Enter Name. Press Enter

    ---

    
    

    2. 
       MXT013251-UN-16DEC14

       Create custom LP name by highlighting desired numbers or letters.

    3. Press Enter after each entry.

    4. Highlight _ and press Enter for space.

    5. Highlight ◄ and press Enter to delete a character entry.

    6. Save name by pressing Enter, OR

    7. Revert to Edit Launch Point Name by highlighting Cancel and pressing Enter.

13. Change launch point name.

14. 
    MXT013249-UN-15DEC14

    Highlight Standard Name and press Enter

---