Using PIN Code

PIN code entry is required after the main switch is moved to ON position.

The default PIN code is 0 0 0 0

A user-defined PIN code may be set. Set a user-defined PIN code to protect the machine from manipulation by unauthorized persons.

Entering PIN Code

  1. Position mower within boundary wire area.

  2. Push main switch to ON position.

  3. Mower will Initialize. User interface display reads Mower Initializing.

  4. User interface display reads Enter Current PIN Code.

    1. Use Left, Right, Up, and Down buttons to position block on desired number. Press Enter button to select number.

    2. Enter current PIN code.

OUO2005,00004B4-19-20151116