Setting Clock
1.
Switch ignition to ON position.
2.
Press and hold DSPL/TM SET (A) button until the "hours" and "minutes" digits flash and you hear a beep.
3.
Press DSPL/TM SET (A) button again until "hours" digits flash.
4.
Rotate SETUP (B) knob to change the hour. Rotate the knob clockwise to increase and counterclockwise to decrease the hour.
5.
Press DSPL/TM SET button again until "minutes" digits flash.
6.
Rotate SETUP knob to change minutes. Rotate the knob clockwise to increase and counterclockwise to decrease minutes.
7.
Press DSPL/TM SET button again to complete time set procedure. Display will return to default display.
|
