Connect Cylinder Hoses to Rear SCV

1. Identify extend and retract hoses.

2. Remove dust caps (if equipped) from hose end.

3. Open coupler covers.

causym CAUTION: Hydraulic hoses can fail due to physical damage, kinks, age and exposure. Check hoses regularly. Replace damaged hoses.

4. Making sure hose end and coupler are clean, push hose tip firmly into selective control valve (SCV) coupler. Pull on hose to make sure positive connection was made.

Connect extend hoses to top couplers (A) and retract hoses to bottom couplers (B).

PULV000129

Triple Rear SCV Shown


A-Top (Extend) Couplers
B-Bottom (Retract) Couplers

SH20560,0000137 -19-11MAR08-1/1