Connect Cylinder Hoses to Mid SCV-If Equipped

NOTE: Hose connections at mid-mount valve are color-coded.

1. Match hoses to couplers using color-coded dust caps/plugs.

Tie Band/Plug/Cap Color Hydraulic Function
Black Bucket Cylinder-Rod End
Yellow Bucket Cylinder-Head End
Blue Boom Cylinder-Head End
Red Boom Cylinder-Rod End
Orange Attachment Cylinder-Head End
Green Attachment Cylinder-Rod End

 

2. Remove dust caps from hose ends.

3. Pull dust plugs from selective control valve (SCV) couplers.

causym CAUTION: Hydraulic hoses can fail due to physical damage, kinks, age and exposure. Check hoses regularly. Replace damaged hoses.

4. Making sure hose end and couplers are clean, slide sleeve then push hose tip firmly into coupler and release sleeve. Pull on hose to make sure positive connection was made.

5. Connect mating (color-coded) plugs and caps together.

SH20560,0000138 -19-24APR08-1/1