Connect and Operate Single-Acting Cylinder

Single-acting cylinder should only be connected to selective control valve (SCV) extend coupler (A).

IMPORTANT: Volume of oil required to extend cylinder will lower transmission-hydraulic oil level. With cylinder fully extended, check oil level and fill to proper level. (See "Check Transmission-Hydraulic Oil Level" in Maintenance Guide.)

Pull Selective Control Valve (SCV) control lever back to pressurize and extend single-acting cylinder.

Push SCV control lever full forward to "float" position to retract cylinder.

A-Extend Couplers

SH20560,0000139 -19-11MAR08-1/1