Stop EngineIMPORTANT: Certain engine parts are cooled by engine oil. Stopping a hot engine could cause damage by overheating or lack of lubrication. 1. Pull hand throttle (A) back to low idle.2. Put speed shift lever in PARK (C), and allow engine to idle for 2-5 minutes. 3. If equipped, place reverser lever into NEUTRAL. 4. Lower all equipment to the ground, put all selective control valve levers in NEUTRAL, and disengage PTO. 5. Turn key (B) to STOP and remove from switch.
|
|
SH20560,0000168 -19-06OCT08-1/1 |