Operate Electrohydraulic Draft Control-If Equipped

Rear hitch load/depth (draft) knob (A) controls 3-point hitch mounted implement ground penetration response to varying soil conditions.

Turn load/depth knob to one of five draft settings (C), to control depth and load, depending on implement and field or soil conditions:

Turn COUNTERCLOCKWISE to reduce draft response.

Turn CLOCKWISE to increase draft response.

With the control turned to a higher number, the implement is raised as resistance (soil density) increases and lowered as resistance decreases; typical settings are:

Implement Draft Control Setting
Integral Ripper/Subsoiler 1-3
Integral Chisel Plow 2-4
Semi-Integral Moldboard Plow 2-4
Integral Moldboard Plow 3-5
Integral Field Cultivator or Box Blade Scraper 4-5

 


A-Load/Depth Control
B-Position Control Detent
C-Draft Control Setting

PULV000090
LX1026120
LX1026059

SH20560,0000378 -19-14JUL08-1/1