Operate PTO

NOTE: Engine will start with PTO switch up (engaged), but PTO shaft will not rotate until switch is reset.

1. Depress clutch pedal, start engine and push hand throttle lever (A) forward until tachometer indicates PTO rated speed:

PTO Rated Speed
PTO Engine rpm Speed
540 2100
540E 1645
1000 2100

 

NOTE: When in 540E position, engine speed is limited to a maximum of 1900 rpm. 540E operation will not engage if engine speed is above 1900 rpm.


A-Hand Throttle
B-540E Operation Speed
C-540 Operation Speed

PULV000077

Cab Shown, other similar

PULV000526

SH20560,0000409 -19-14JUL08-1/3

PULV000146

OOS
PULV000074

Cab


A-540/540E PTO Speed Shift Lever
B-Electrohydraulic PTO Switch
C-PTO Indicator

NOTE: PTO is engaged or disengaged without depressing clutch pedal.

2. Engage PTO:

Lift switch (B) up to engage PTO.

PTO indicator (C) will light when PTO is engaged.

IMPORTANT: A warning alarm will sound if operator leaves seat with PTO engaged.

NOTE: If engine is stopped while PTO is engaged, restart engine, depress and lift switch knob (B) to reset and engage PTO.

IMPORTANT: Do not use PTO speed shift lever to engage or disengage PTO.

PULV000529

SH20560,0000409 -19-14JUL08-2/3

PULV000146

OOS
PULV000074

Cab

3. Disengage PTO:

Push switch knob (B) down to disengage PTO.

PTO brake automatically engages when PTO is disengaged.

PTO indicator (C) is off when PTO is disengaged.

IMPORTANT: Do not use PTO speed shift lever to engage or disengage PTO.


A-540/540E PTO Speed Shift Lever
B-Electrohydraulic PTO Switch
C-PTO Indicator

PULV000529

SH20560,0000409 -19-14JUL08-3/3