Before Starting the Engine

causym CAUTION: Prevent asphyxiation by providing adequate ventilation. If operating indoors, use an exhaust pipe extension to remove the exhaust fumes or open doors and windows to thoroughly ventilate the area.

TS220

Engine Exhaust Fumes

SH20560,0000456 -19-07MAY08-1/4

PULV000561

Speed Shift Lever and Range Shift Lever
PULV000072

PowrReverser™ Lever

1. Transmission Controls: Put speed shift lever (A) in PARK and range shift lever (B) in NEUTRAL.

If equipped, put reverser lever (C) in NEUTRAL.


A-Speed Shift Lever
B-Range Shift Lever
C-Reverser Lever

PULV000138

SyncReverser™ Lever

SH20560,0000456 -19-07MAY08-2/4

PULV000074

Cab
PULV000146

OOS
 

A-PTO Speed Shift Lever

B-Rear PTO Switch

  

2. Disengage PTO: Push PTO switch (B) down then place PTO speed shift lever (A) in neutral.

NOTE: Do not engage or disengage PTO using PTO shift lever (A).

SH20560,0000456 -19-07MAY08-3/4

3. Push hitch position control lever (A) forward to lower equipment to the ground.

4. Turn key to RUN position and check gauges and indicator lights.


A-Hitch Control Lever

PULV000075

Mechanical Hitch-OOS

PULV000076

Electrohydraulic Hitch-Cab

SH20560,0000456 -19-07MAY08-4/4