Determine Maximum Rear Ballast

IMPORTANT: DO NOT overload tires. If maximum weight shown in chart is not enough for safety, reduce load or install heavier ply tires.

To extend drive train life, avoid excessive soil compaction and rolling resistance, avoid adding too much ballast. Ballast should never exceed the weight required to provide traction for continuous full power loads in 3rd gear. Remove ballast if tractor engine labors when pulling heavy loads in the first three gears.

Chart shows carrying capacity per tyre.

MAXIMUM LOAD PER WHEEL
Tyre Size Bias Ply tires	Ply Rating	Capacity kg (lb)
14.9-28	8*/12	1545 (3406)
13.6-28	12	1329 (2930)
12.4-28	12	1211 (2670)

NOTE: * 8 ply rating is applicable for MFWD HLD tyres