Safety Signs—OOS
CAUTION:

LV15921-19-03OCT12
Safety Label

LV16105-UN-20SEP12
Left-Hand Fender
WARNING

LV6526-19-14MAR01
Safety Label

LV16106-UN-20SEP12
Left-Hand Fender
AVOID CRUSHING
-
Keep rollover protective structure fully
extended.
-
Do not jump if machine flips.
-
Use seat belt.
When structure must be down,
-
DO NOT use seat belt.
-
Drive with extra care.
CAUTION:

PULV000209-19-22FEB08
Safety Label

LV16107-UN-20SEP12
Left-Hand Fender
-
Read Operator's Manual before operating this
tractor.
-
Keep all shields in place.
-
Hitch towed loads only to drawbar to avoid
rearward upset.
-
Make certain everyone is clear of machine
before starting engine or operation.
-
Keep all riders off tractor and equipment.
-
Keep hands, feet and clothing away from power-driven
parts.
-
Reduce speed when turning or applying individual
brakes or operating around hazards on rough ground or steep slopes.
-
Couple brake pedals together for road travel.
-
Use flashing warning lights on highway unless
prohibited by law.
-
Stop engine, lower implement to ground and
shift to “PARK” or set handbrake securely before dismounting.
-
Wait for all movement to stop before servicing
machinery.
-
Remove key if leaving tractor unattended.
WARNING

RXA0068063-19-08JUL04
Safety Label

LV16108-UN-20SEP12
Left-Hand Fender
Avoid serious injury or death resulting from
loss of control during transport or braking of a towed implement.
This tractor is capable of operating at transport
speeds that may exceed the maximum allowable transport speed for towed
implements. If implement manufacturer does not specify maximum transport
speed, observe these transport speed limits:
—Implements without brakes: 32 km/h
(20 mph)
—Implements with brakes: 40 km/h (25
mph)
Do not exceed the implement’s maximum
transport speed.
Front End Loader—If Equipped
WARNING

RXA0068062-19-29JUN05
Safety Label

PULV000211-UN-06MAR08
OOS Right-Hand Console
AVOID INJURY OR DEATH CAUSED BY FALLING LOADS
When using loader ALWAYS put SCV selector
knobs in loader position.
If you do not, loader will continue to
move after controls are released.
See operators manual for use of other knob
positions.
|
|
JZ81662,0000F25-19-20141030
|
|