Operating Radio—If Equipped

1. 
   LV16343-UN-28NOV12

   A - Band

   B - Scan

   C - Auto Preset

   D - Dim

   E - Preset Stations

   F - Tune

   G - Seek

   H - Display/Time Set

   I - On/Audio/Volume

   J - Power

   Press BAND (A) to select between the different bands (AM, FM, CD).

---




2. Press TUNE (F) once to turn to the next higher station. Press SEEK (G) once to turn to the next lower station.

3. Press and hold both TUNE (F) and BAND (A) to switch between manual tune mode and “seek” mode.

4. Holding SEEK longer than half a second begins the “seek” function. When a station with a strong enough signal is found, “seek” function will stop at that station.

5. Press SCAN (B) to scan all stations. When a strong enough signal is found, the station will play for 5 seconds then continue to scan until SCAN is pressed again.

6. Adjust volume, bass, treble, fade, and balance by pressing and releasing ON/AUDIO/VOLUME knob (I) repeatedly until desired function appears on display. Rotate ON/AUDIO/VOLUME knob for adjustment.

7. Adjust brightness of display by pressing (D) until “DIM” appears on display. Rotate ON/AUDIO/VOLUME knob to adjust.