Stopping the Engine

IMPORTANT: Before stopping engine that has been operating at working load, idle engine at least 1 or 2 minutes at 1000—1200 RPM to cool hot engine parts. If an Exhaust Filter Cleaning has just been performed, increase engine idle time to 4 minutes.

If service work is going to be performed on the Exhaust Filter, increase engine idle time to 10 minutes.

1. 
   LV16348-UN-28NOV12

   Hand Throttle (Cab shown; OOS similar)

   
   LV16349-UN-28NOV12

   Key Switch (Cab shown; OOS similar)

   A - Hand Throttle

   B - Key Switch

   Pull hand throttle (A) back to slow idle.

---




2. Put range shift lever in NEUTRAL position.

3. Put gear shift lever in PARK, and allow engine to idle for 2—5 minutes.

4. For PowrReverser™ Transmission, put EH directional reverser lever in NEUTRAL.

5. Lower all equipment to the ground, put all SCV levers in NEUTRAL, and disengage PTO.

6. Turn key switch (B) to STOP and remove from switch.