Cleaning Hood Screen, Radiator, Oil Cooler or A/C Condenser

1. CAUTION: Reduce compressed air to less than 210 kPa (2 bar) (30 psi) when using for cleaning purposes. Clear area of bystanders, guard against flying chips, and wear personal protection equipment including eye protection.

   
   TS266-UN-23AUG88

   
   LV16366-UN-30NOV12

   Grille

   
   LV14677-UN-19AUG11

   Radiator with Swing Out

   A - Grille

   B - Charge Air Cooler

   C - A/C Condenser (Cab)

   D - Radiator

   Whenever trash builds up on front grille (A), stop engine and brush clean.

---




2. Raise hood and see if trash has built up on charge air cooler (B), oil cooler (if equipped), radiator (D) or A/C condenser (C) (cab). If so, remove it using a brush or compressed air.

3. If a more thorough cleaning is required the air charge cooler can be tilted away from the radiator for easier access.

4. 
   LV14678-UN-19AUG11

   A - Release Latch

   Release latches (A) located at each side of the radiator and tilt air charge cooler away from radiator to gain access.

---




5. Straighten any bent fins.

6. Secure latches.