Using Implement Codes

CAUTION: DO NOT attempt to transport an implement without adequate front ballast. Lack of steering control may result.

John Deere engineers have developed a code to determine how much front ballast is needed for stability and steering control.

1. Find implement code in implement operator's manual.

2. Use the following chart to determine how many Quik-Tatch™ front weights are required on your tractor model.

   To use chart, find the implement code range in the left column into which your implement code fits. Then move to the right until you are beneath the column which identifies your tractor configuration. The number you find at this point in the chart is the number of Quik-Tatch™ weights needed.

   Example: An implement with a code 100 to be used on an MFWD tractor with a quick-coupler, but without liquid in the front tires, requires 4 front weights.

   With maximum front ballast, do not attempt to transport an implement whose code exceeds:

   • 137 for MFWD Tractor
   
   

   NUMBER OF Quik-Tatch™ WEIGHTS NEEDED
   MFWD
   Implement Code	Without Liquid in Front Tires	With Liquid in Front Tires
   0—87	0	—
   88—97	2	0
   98—107	4	2
   108—117	6	4
   118—127	8	6
   128—137	—	8