Service Interval Chart

Item

Daily or 10 Hours

Weekly or 50 Hours

First 100 Hours

Every 300 Hours

Every 500 Hours

Check Engine Oil Level

       

Drain Water and Sediment from Fuel Filter 1

       

Air Filter Unloader Valve

       

Check Engine Coolant Level

 

     

Check Transmission-Hydraulic System Oil Level

 

     

Check MFWD for Oil Leaks

 

     

Check MFWD Axle Housing and Wheel Hub Oil Level

 

     

Inspect Tires and Check Inflation Pressure

 

     

Lubricate MFWD Axle Trunnion

 

     

Lubricate Hitch Linkages and Rockshaft Bushings 2

 

     

Inspect Tractor for Loose Hardware

 

   

INITIAL Change Engine Oil and Filter (Change Break-In Plus™ to John Deere Plus-50™ II

   

   

Change Transmission-Hydraulic Filter 3

   

   

Inspect and tighten hose clamps on the air intake system and coolant system

   

   

Check MFWD Oil Level

     

 

Drain and Flush Fuel Tank (Per local conditions and dealer recommendation)

     

 

Battery Electrolyte Check (If recommended by John Deere or dealers for a local market’s higher temperature working condition)

     

 

Change Engine Oil and Filter SCHEDULED: Engine Oil and Filter Change (When using John Deere Plus-50™ II engine oil and John Deere filter)

       

Inspect Engine Air Cleaner2

       

Check Neutral Start System

       

Clean Cab Air Filters2

       

Change Fuel Filter(s)4

       


Break-In Plus is a trademark of Deere & Company

Plus-50 is a trademark of Deere & Company
1 The fuel filter must be drained when water or debris is evident in the sediment bowl. If this reoccurs more than three days in a row, then drain the sediment from the fuel tank. Run engine for a minimum of 20 seconds, re-check and if more water collects, drain the fuel tank.
2 Service more often if operated in extremely dusty conditions.
3 Using a shop-vac, apply suction to the fill port during filter change to prevent draining of the hydraulic oil.
4 Make sure to replace with fuel filter(s) of part numbers correct for the tractor’s model and specifications due to critical differences in mount, filter performance specifications, direction of internal flow, etc.

JZ81662,00007AC-19-20120522