Stopping the Tractor

1. 
   LV12797-UN-04OCT06

   
   LV15734-UN-07MAY12

   A - Hand Throttle

   B - Key Switch

   Stop tractor travel with brakes.

---




2. CAUTION: Leaving transmission in gear with engine off WILL NOT prevent tractor from moving.

   IMPORTANT: Stop tractor before moving gear shift lever to PARK. Park pawl will not engage, and transmission may be damaged if tractor is moving.

   Move gear shift lever to PARK.

3. For PowrReverser™ Transmission, put EH directional reverser lever in NEUTRAL.

4. Disengage PTO.

5. Put all SCV levers in NEUTRAL.

6. Lower all equipment to the ground.

7. IMPORTANT: Cooling of certain engine parts is provided by engine oil. Stopping a hot engine suddenly could cause damage to these parts by overheating or lack of lubrication.

   Pull hand throttle (A) back to slow idle position. Allow engine to idle for 2—5 minutes.

8. CAUTION: Remove key from ignition switch to prevent operation by untrained personnel.

   Turn key switch (B) to STOP position and remove key from switch.