Stop the Tractor (With Park Pawl)

PY22869-UN-08MAY15

PY11397-UN-10JAN11

PY1469-UN-28AUG03

PY17248-UN-30OCT13

.

A - Gear Shift Lever

B - Hand Throttle

C - Draft Control Lever

D - Position Control Lever

E - Fuel Shut Off Knob

1. CAUTION: Always place the gear shift lever in PARK before dismounting. Leaving transmission in gear with engine OFF MAY NOT prevent tractor from moving.

   IMPORTANT: Tractor must be stopped before placing gear shift lever in PARK. Park pawl will not engage, and the transmission may be damaged if tractor is moving.

   Stop the tractor and place gear shift lever (A) in PARK position.

2. Disengage PTO levers.

3. Lower all equipment to ground using position control lever (C and D).

4. Put SCV lever in neutral position.

5. Pull hand throttle (B) down to slow idle position. Allow engine to idle for one to two minutes.

   IMPORTANT: Cooling of certain engine parts is provided by engine oil. Stopping a hot engine suddenly could cause damage to these parts by overheating or lack of lubrication.

6. CAUTION: Remove the key from key switch to prevent operation by untrained personnel.

   Turn key switch to OFF position.

   NOTE: Pull manual fuel shut-off knob (E) (at lower left side of control support) rearward and hold until engine has completely stopped.