Report Menu

APY13266-UN-21MAR19

A - Engine Utilization

B - Work Report

C - Area Report

By clicking the report menu app traverses to the report screen.

Engine Utilization Report

NOTE: Engine utilization data can record into the app for seven days in case data available for all seven days otherwise shows as ‘No Data Available’.

APY13273-UN-22MAY19

A - Update Button

B - Backward Arrow Button

C - Forward Arrow Button

1. Clicking engine utilization from report screen traverses to the engine utilization screen.

   Engine utilization report shows the details of engine operations in different rpm zones is shown.

   • Engine OFF
   • 0-750 rpm
   • 750-1000 rpm
   • 1000-1250 rpm
   • 1250-1500 rpm
   • 1500-1750 rpm
   • 1750-2000 rpm
   • 2000-3000 rpm
   
   

2. Clicking cumulative tab shows the cumulative engine utilization in the form of a pie chart.

   NOTE: Daily tab always default view when open the engine utilization report.

3. Clicking the update button (A) sends a request for information.

4. If the values are received within the time-out then the pie chart updated with received values for that day.

5. Press the backward button (B) and forward button (C)for checking the data up to seven days.

6. 
   APY13274-UN-22MAY19

   If the values are not received within the time-out then shows message as ‘Tractor is switched Off or out of coverage area try again’

---




7. Press the back button to traverse to the report menu.

Work Report

NOTE: Work report data can record into the app for seven days in case data available for all seven days otherwise shows as “No Data Available”.

APY13275-UN-22MAY19

A - Backward Arrow Button

B - Forward Arrow Button

C - Start Stop Time

D - Hour Meter¹

E - Fuel Level²

F - Information Tab

1. 
   PY25110-UN-18JUN15

   Clicking work report traverses to work report screen.

---




2. Work report indicates appropriate indications with respective colors. Green indicates the starting of the engine and red indicates stopping of the engine.

3. Press the backward button (A) and forward buttons (B) for checking the data up to seven days.

4. By clicking the information tab screen displays detailed description of all work report tabs.

5. Press the back button to traverse to the report menu.

Area Report

NOTE: Area report data can record into the app for seven days in case data available for all seven days otherwise shows as “No Data Available”.

APY13276-UN-22MAY19

B - Backward Arrow Button

C - Time when Area Measurement Started

D - Engine Hours Required to Perform Operation

E - Time when area Measurement Stopped

F - Area Measured

G - Clocked Hours

H - Forward Arrow Button

I - Information Tab

1. Clicking area report traverses to the area report screen.

2. Press the backward and forward arrows (B) for checking the area report up to seven days.

3. By clicking the information tab screen displays detailed description of all work area tabs.

4. Press the back button to traverse to the report menu.