Adjust Hitch Side Sway Rod (If Equipped)

LX1031675-UN-19FEB03

Stabilizer Bar

LX1031676-UN-06MAR03

Position 1

LX1031677-UN-19FEB03

Position 2

LX1033523-UN-19NOV03

A - Adjuster

B - Threaded Rod

C - Pin

D - Rod

The stabilizer bar can be used to adjust the draft links to Category I (bar length 444 mm; 17.5 in.) or Category II (bar length 425 mm; 16.7 in.). Do this by turning adjuster (A) until its end is level with the groove in threaded rod (B).

When properly adjusted for Category I, the shorter slot is uppermost. For Category II, the longer slot is uppermost.

Pin (C) can be used to fix the draft link or to set it for lateral sway.

Even in position 1 (as shown), the draft links can sway to a slight extent. If special circumstances require even this sway to be eliminated, install pin (C) behind the end of rod (D) and turn the adjuster until the draft links are rigid.

• Position 1 = fixed (no lateral sway)
• Position 2 = lateral sway