Adjust Toe-In—Two-Wheel Drive Tractor

PY4372-UN-15JUN06

A - Lock Nuts

B - Tie Rod Bolts

C - Inner Tube

1. Loosen lock nuts (A) and back out the bolts (B) on tie rod tubes several turns.

2. Adjust tie rods on both sides of the tractor equally by rotating the inner tube (C) to lengthen or shorten tie rod. Adjust toe-in to 3 to 6 mm (1/8 to 1/4 in.)

   Tie Rod Rotation	Approximate Change in Toe-in
   1/2 turn	8 mm (5/16 in.)
   1 turn	16 mm (5/8 in.)

3. Tighten bolts (B) to specification. Do not overtighten as damage to the tube may occur.

   Item	Measurement	Specification
   Tie Rod Bolts	Torque	85 N˙m (62 lb-ft)

4. Tighten the lock nuts (A) to specification.

   Item	Measurement	Specification
   Tie Rod Lock Nuts	Torque	90 N˙m (66 lb-ft)