Stopping Tractor (With Park Brake)

APY42764-UN-27OCT20

Park Brake Lever

PY19087-UN-07OCT13

PY1238-UN-11JUN02

A - Parking Lever

B - Hand Throttle

C - Rockshaft Draft Control Lever

D - Rockshaft Position Control Lever

E - Key Switch Off Position

1. CAUTION: Always engage the PARK brake lever before dismounting. Leaving transmission in gear with engine off MAY NOT prevent tractor from moving.

   IMPORTANT: Tractor must be stopped before engaging the PARK brake lever.

   Pull lever (A) to engage Parking brake.

2. Lower all equipment to ground using rockshaft position control lever (D).

3. Pull hand throttle (B) down to slow idle position. Allow engine to idle for one to two minutes.

   IMPORTANT: Cooling of certain engine parts is provided by engine oil. Stopping a hot engine suddenly could cause damage to these parts by overheating or lack of lubrication.

4. Turn key switch to OFF position.

   CAUTION: Remove key from key switch to prevent operation by untrained personnel.