Clean Transmission-Hydraulic Pickup Screen

  1. NOTE: The approximate transmission case oil capacity is 38 L (10 gal).

    Drain transmission-hydraulic oil. (See Change Transmission-Hydraulic Oil and Filter in this section.)

  2. PY2250
    PY2250-UN-16MAR04

    A - Cap Screw (2 used)

    B - Screen Cover

    Remove two cap screws (A) and remove screen cover (B).


  3. Remove screen and examine it for damage. Replace if necessary. Clean screen in solvent and blow dry with compressed air.

  4. Carefully install screen so the front of screen is inserted in hole at front of differential case.

  5. Fill system with transmission-hydraulic oil. (See Change Transmission-Hydraulic Oil and Filter in this section.)

  6. PY4447
    PY4447-UN-04JAN05

    C - Transmission-Hydraulic Oil Dipstick

    If dipstick is equipped: Check oil level at dipstick (C) after filling and again after operating for five minutes.


  7. PY11298
    PY11298-UN-07FEB11

    If Equipped

    B - Full Level Mark

    C - Low Level Mark

    If sight glass is equipped: Check oil level at sight glass (B) is to the full mark and check again after operating for five minutes.

SM27053,0000043-19-20180206