Break-In Service

IMPORTANT: Keep wheel hardware tight to avoid tractor damage. Check wheel hardware torque before operating, twice during first ten hours of operation, after fifty hours of operation, and periodically thereafter.

During the First 10 Hours of Operation:

Perform daily or 10 hours service. (See Service Intervals in Lubrication and Maintenance section)

Tighten wheel hardware. (See Wheels, Tires, and Treads section)

After the First 50 Hours of Operation:

Tighten wheel hardware. (See Wheels, Tires, and Treads section)

Check alternator/fan belt tension and tighten air intake and cooling system hose clamps.

Perform 50 Hours Service.

After the First 100 Hours of Operation:

Replace transmission-hydraulic filter element.

Change engine oil and filter.¹