OMSJ23691

Transmission Troubleshooting

Symptom	Problem	Solution
Transmission oil overheats	Low oil supply.	Fill system with correct oil.
	Clogged transmission-hydraulic oil filter.	Replace filter.
	Internal hydraulic leak.	See your John Deere dealer.
	Hitch feedback linkage improperly adjusted.	Reset linkage. See your John Deere dealer.
	Hydraulic motor not plumbed correctly.	See your John Deere dealer.

Low transmission pressure.	Low oil supply.	Fill system with correct oil.
	Clogged transmission-hydraulic oil filter.	Replace filter.

Transmission stuck in neutral or it is hard to shift any gear	Machine not moving (Applicable for PowrReverserPowrReverser is a trademark of Deere & Company Transmission Only.)	Operator (with minimum 50 kg of weight) should be on Operators seat, to move forward, or reverse by pressing clutch and command to drive by FNR lever.
	Speed shift linkage stuck or rusty.	Clean or lubricate the speed shift lever linkages
	Interlock cable misadjusted	Adjust interlock cable per technical repair manual

PowrReverser is a trademark of Deere & Company

MD36154,0001382-19-20201117