Stop Tractor (Cab — SyncShuttle)

PY16162-UN-11SEP12

PY16163-UN-25JUN12

A - Gear Shift Lever

B - Hand Throttle

C - Draft Control Lever

D - Position Control Lever

1. STOP tractor travel by depressing clutch pedal first or while using the brakes.

2. Put gearshift lever (A) in NEUTRAL before or while using the brakes.

3. IMPORTANT: Cooling of some engine parts is provided by engine oil. Stopping a hot engine suddenly can damage these parts by overheating or lack of lubrication.

   Pull hand throttle (B) down to low idle position. Allow engine to idle for 1—2 minutes.

4. Lower all equipment to ground using position control lever (D).

5. Put all SCV levers in NEUTRAL.

6. Disengage PTO.

7. CAUTION: To prevent operation by untrained personnel, remove key from ignition switch.

   Turn key to STOP position and remove from switch.