Break-In Service

IMPORTANT: Keep wheel hardware tight to avoid tractor damage. Check wheel hardware torque before operating, twice during first ten hours of operation, after fifty hours of operation, and periodically thereafter.

During the First 10 Hours of Operation:

Perform daily or every 10 hours service. (See service intervals in Lubrication Maintenance Record Charts section.)

Tighten wheel hardware. (See Wheels, Tires and Treads section.)

After the First 50 Hours of Operation:

Tighten wheel hardware. (See Wheels, Tires and Treads section.)

Check and Adjust Cooling Fan V-Belt and tighten air intake and cooling system hose clamps.

Perform 50 Hours Service.

After the First 100 Hours of Operation:

IMPORTANT: Change engine oil and filter after the first 100 hours of operation and then at every 250 hours of operation thereafter.

IMPORTANT: Change transmission-hydraulic oil filter after the first 100 hours of operation and then at every 500 hours of operation thereafter.

IMPORTANT: Change MFWD axle oil after the first 100 hours of operation and then at every 600 hours of operation thereafter.

Change engine oil and filter.

Change transmission-hydraulic oil filter element.

Change MFWD Axle Oil

Perform 100 Hours Service.