Machine Specifications
| Item | Measurement | Specification |
| 5045D—3029T Engine, Turbocharged |
|
Factory Observed PTO
| Power | 27.3 kW (37 hp) at 2300
rpm |
|
Engine torque
| Torque | 187 N.m @ 1600 rpm |
|
Cylinders
| Quantity | 3 |
|
Bore
| Distance | 106.5 mm (4.19 in.) |
|
Stroke
| Distance | 110 mm (4.33 in.) |
|
Displacement
| Volume | 2.9 L (179 cu in.) |
|
Cylinder Firing
| Order | 1—2—3 |
|
Intake Valve
| Clearance | 0.35 mm (0.014 in.) |
|
Exhaust Valve
| Clearance | 0.45 mm (0.018 in.) |
|
Slow Idle
| Speed | 800 - 875 rpm |
|
Fast Idle
| Speed | 2475—2550 rpm |
|
Operating Range
| Speed | 1700 - 2300 rpm |
|
Injection Pump Timing (2WD)
| Position | -1° BTDC |
| Item | Measurement | Specification |
| 5055D—3029T Engine, Turbocharged |
|
Factory Observed PTO
| Power | 33.1 kW (45 hp) at 2300
rpm |
|
Engine torque
| Torque | 220 N.m @ 1600 rpm |
|
Cylinders
| Quantity | 3 |
|
Bore
| Distance | 106.5 mm (4.19 in.) |
|
Stroke
| Distance | 110 mm (4.33 in.) |
|
Displacement
| Volume | 2.9 L (179 cu in.) |
|
Cylinder Firing
| Order | 1—2—3 |
|
Intake Valve
| Clearance | 0.35 mm (0.014 in.) |
|
Exhaust Valve
| Clearance | 0.45 mm (0.018 in.) |
|
Slow Idle
| Speed | 800 - 875 rpm |
|
Fast Idle
| Speed | 2475—2550 rpm |
|
Operating Range
| Speed | 1700 - 2300 rpm |
|
Injection Pump Timing (2WD)
| Position | 0.0° BTDC |
| Item | Measurement | Specification |
| Electrical System—12-Volt, Negative
Ground |
|
Battery
| Voltage | 12-volt |
|
Alternator
| Amperage | 40 amps |
|
Starting Motor
| Voltage | 12 volts |
-
Transmission:
-
SyncReverser™ Transmission
-
8 Forward Gears
-
4 Reverse Gears
-
Lever Gear Selector
-
Manual Shift
-
Brakes:
-
Mechanically Activated
-
Wet Disk
-
Power Take-Off:
-
Standard Fully Independent PTO (540)
-
Lever Operated Clutch
| Item | Measurement | Specification |
| Power Take-Off |
|
Engine - 540 | Speed | 2300 rpm |
-
Hydraulic System:
-
Open Center Type
-
Tandem Gear Pump
-
Hydrostatic Power Steering
| Item | Measurement | Specification |
| Hydraulic System |
|
Pump Displacement—Steering
| Displacement | 11.9 cu cm (0.73
cu in.) |
|
Pump Displacement—Implement
| Displacement | 20 cu cm (1.22
cu in.) |
|
Steering1
| Flow Rate | 24.6 L/min. (6.5
gpm) |
|
Implement1
| Flow Rate | 41.4 L/min. (10.9
gpm) |
|
Total pump Flow
| Flow Rate | 66 L/min. (17.4
gpm) |
|
Implement (Maximum)
| Pressure | 19000—20000
kPa (190 — 200 bar) (2755—2900 psi) |
|
Hydraulic lift at hitch balls
| Capacity | 1450 Kg |
|
Hydraulic lift behind 24 inch hitch balls
| Capacity | 1284 Kg |
|
SyncReverser is a trademark of Deere & Company
1 Flow rate at 90% pump efficiency
and engine at rated speed.
|
PG57337,0000221-19-20130625
|
|