Using Rear Power Take-Off (PTO)

IMPORTANT: Avoid damage. Use rear mounted equipment rated for 540 rpm. Do not operate PTO over the rated rpm mark on the tachometer.

NOTE: DO NOT operate the PTO when the operator is not seated on the seat.


Engaging the PTO

  1. APY07746
    APY07746-UN-26FEB19

    A - PTO Lever

    B - PTO at Neutral Position

    C - PTO at 540 rpm

    Sit on the operator seat.


  2. Stop machine in motion.

  3. Depress the clutch pedal.

  4. Reduce throttle setting to low idle speed.

  5. To engage PTO at 540 rpm (C) position, slide PTO lever (A) toward right and then rearward and set the engine rpm to 2400 rpm for 3025D, 2800 rpm for 3035D and 3043D.

  6. Release the clutch pedal to begin PTO operation.


Disengaging the PTO

  1. Depress the clutch pedal.

  2. To disengage PTO, move PTO lever (A) to NEUTRAL position (B) from forward or rearward PTO engaged position.

DP97633,00003B5-19-20190226