Check Neutral Start System-PowrReverser™ Transmission (If Equipped)

Service Interval-250 Hours

 

Transmission Control

1. Make sure everyone is clear of tractor.

2. Fully depress clutch and brake pedals.

3. Move PowrReverser lever (A) to FORWARD or REVERSE position.

4. Start engine. If engine starts in either of these positions, neutral start system should be repaired. See your John Deere dealer immediately .

Engine should start with lever in NEUTRAL position only.

PTO Lever

1. Fully depress clutch and brake pedals.

2. Move PTO lever (B) forward to ENGAGED position.

3. Start engine. If engine starts in this position, neutral start system should be repaired. See your John Deere dealer immediately .

Engine should start with lever in DISENGAGED position only.

P15260

PowrReverser Lever Shown

P14887

Left-Hand Panel


A-PowrReverser Lever
B-PTO Control Lever

OUMX005,000293C -19-07APR08-1/1