Break-In Service
IMPORTANT:
Keep wheel hardware tight for safety. Check wheel hardware torque before operating, twice during first ten hours of operation and thereafter every week/50 hours of operation.
New engines are filled with John Deere DIESEL ENGINE BREAK-IN OIL. If oil is required in first 100 hours, be sure to use BREAK-IN oil. Change oil and filter after first 100 hours of operation.
If tractor is used under light load conditions during first 100 hours, refill with John Deere Break-In oil for an additional 100 hours to allow engine to break-in properly.
After first 100 hours of operation:
-
Replace engine oil.
1
-
Tighten air intake system and cooling system hose clamps.
-
Inspect tractor for loose hardware.
|