Machine Specifications

  5085M 5095M
POWER  
Engine Horsepower at 2200 rpm
(Factory observed per 97/68/EC ISO industry standard) (± 3 %)
63.5 kW
(85.2 hp)
71.5 kW
(96 hp)
PTO Horsepower at 2100 rpm
(Factory observed per SAE industry standard) (± 5%)
52.2 kW
(70 hp)
59.6 kW
(80 hp)
ENGINE  
Type Diesel Diesel
Aspiration Turbocharged / Air-to-Air Aftercooled Turbocharged / Air-to-Air Aftercooled
Cylinders In-line, 4 In-line, 4
Displacement 4.5 L (276 cu. in.) 4.5 L (276 cu. in.)
Low Idle Speed 850 ±50 rpm
High Idle Speed 2375 ±25 rpm
Fuel Injection Mechanical Mechanical
ELECTRICAL SYSTEM  
Battery Voltage 12 V
Battery Cold Cranking Amps 925
Reserve Capacity (minutes) 180
Battery BCI Group Size 31
Alternator Capacity Open Operator's Station: 70 amp
Optional: 120 amp
POWER TAKE-OFF (PTO)  
PTO Speed Options Engine Speed
· 540 rpm 2100 rpm
· 540E rpm 1645 rpm
· Ground Drive PTO Proportionate to Vehicle Speed
HYDRAULIC SYSTEM  
Pump Type Gear Gear
Pump Displacement-Steering 9.50 cm3
0.58 cu. in.
9.50 cm3
0.58 cu. in.
Pump Displacement-Implement 28 cm3
1.71 cu. in.
28 cm3
1.71 cu. in.
Steering Flow Rate (Flow rate at 90% pump efficiency and engine at rated speed) 23.7 L/min
6.3 gpm
23.7 L/min
6.3 gpm
Implement Flow Rate (Flow rate at 90% pump efficiency and engine at rated speed) 69.9 L/min
18.4 gpm
69.9 L/min
18.4 gpm

 

AJ20558,00002C8 -19-08SEP09-1/2


  5085M 5095M
Maximum Pressure-Steering 13000-13500 kPa
130-135 bar
1885-1958 psi
19000-20000 kPa
190-200 bar
2755-2900 psi
Maximum Pressure-Implement    

 

AJ20558,00002C8 -19-08SEP09-2/2