Service-As Required

  • Service Engine Air Cleaner 1 , 2
  • Adjust PTO Speed Shift Lever-Open Operator's Station 3
  • Adjust Hand Throttle Friction Linkage 3
  • Adjust Hand and Foot Throttle Cable 3
  • Adjust Clutch Pedal Cable-If Equipped with SyncShuttle™ Transmission 3
  • Adjust Park Position Bracket
  • Test Injection Nozzles 3
  • Clean and Check Battery Condition
  • Clean Grille Screens, Radiator, Oil Cooler, and Radiator Screen (If Equipped)
  • Lubricate Axle Pivot Point-2WD 4
  • Lubricate Steering Spindles and Steering Cylinder Ends-Adjustable Front Axle 4
  • Lubricate Rear Axle Bearings 4
  • Lubricate Draft Sensing Shaft Seal 4
  • Drain and Flush Fuel Tank 3
  • Keep ROPS Installed Properly-Open Operator's Station
  • Bleed Fuel System
  • Replace Battery
  • Locate Fusible Links
  • Locate Fuses-Open Operator's Station
  • Fuse and Relay Size and Function
  • Handle Halogen Light Bulbs Safely
  • Replace Headlight Bulb
  • Replace Tail Light Bulb-Deluxe OOS
  • Replace Tail Light and/or Warning Light Bulb-Open Operator's Station
  • Replace Work Light Bulb-Open Operator's Station
  • Replace Fender Light Bulb-Open Operator's Station
  • Replace Loader Light Bulb-If Equipped
  • Replace Rotary Beacon Light Bulb-If Equipped
  • Adjust Secondary Brake 3
  • Adjust Hydraulic Trailer Brake 3

NOTE: For maintenance procedure, refer to Maintenance Guide .

1The primary element can be cleaned up to five times. Thereafter or at the latest after one year of operation, it must be replaced.

2Service more often if operated in extremely dusty conditions.

3See your John Deere dealer for service.

4Daily service if operating in extremely wet and muddy conditions.

AJ20558,00002D5 -19-31AUG09-1/1