Adjusting Lateral Float

P7489-UN-19OCT00

P7490-UN-19OCT00

A - Float pin in vertical position

B - Float pin in horizontal position

To allow the draft link to raise slightly as implement follows ground contour, place head of float pin and the rectangular washer on the inside end of the pin in a vertical position (A).

To hold implement rigid, place head of float pin and the rectangular washer in the horizontal position (B).

Use lift link pins in the float position for hitch mounted implements such as a cultivator or mower, which have ground gauging skids or wheels which may cause the implement to twist relative to the Tractor.

Use the rigid position for implements such as plows and ground engaging implements that should not twist relative to the Tractor.