Adjusting Toe-In—MFWD

M47182A-UN-11JUN94

A - Tie Rod Jam Nuts

B - Inner Rod

1. Loosen jam nuts (A) on both ends of tie rod.

2. Adjust both sides equally by rotating the inner rod (B) to lengthen or shorten tie rod, as needed, to obtain toe-in or toe-out of less than 3 mm (1/8 in.).

   Tie Rod Rotation	Approximate Change
   1/8 turn	4 mm (3/16 in.)
   1/4 turn	8 mm (3/8 in.)
   1/2 turn	16 mm (5/8 in.)

3. Tighten jam nuts to specification.

   Item	Measurement	Specification
   Jam Nuts	Torque	120 N˙m (88 lb-ft)