Engine Break-In Oil

The break in oil TY22041 (3.785L) (1 gal.) and TY22042 (208 L) (55 gal.) contain especial additives and are used in new John Deere or rebuilt Engines during break in period.

The first 100 hours maximum of operation are critical on the life of engine performance, during this period rings, cylinders are breaked in to obtain property performance.

IMPORTANT: DO NOT USE other oil during the first 100 hours operation of a new or rebuilt engine. This oil will not allow the engine to break-in properly.

NOTE: When is required to add oil during the first 100 hours, use only “break-in oil”.

MIXING OF LUBRICANTS

In general, avoid mixing different brands or types of oil. Oil manufacturers blend additives in their oils to meet certain specifications and performance requirements.

Mixing different oils can interfere with the proper functioning of these additives and degrade lubricant performance.

Consult your John Deere engine distributor or servicing dealer to obtain specific information and recommendations.