Service During Break-In Period

Within first 10 hours of operation:

• Carry out daily or 10 hour service. (Consult Service Intervals, in this Section).

  IMPORTANT: Always keep wheel bolts tightened. Check wheel bolt torque at least twice within the first ten hours of operation, after at fifty hours and periodically thereafter.

• Tighten wheel bolts. (See Treads, Wheels and Tires section).

After First 50 Hours of Operation:

• Tighten wheel bolts. (See Treads, Wheels and Tires section).
• Check alternator/fan belt tension and tighten all clamps of air intake and cooling system hoses.
• Retighten hydraulic hoses.
• Carry out 50 hour service.

After First 100 Hours of Operation:

• Change the transmission/hydraulic system oil filter.
• Change engine oil and filter.

* This is necessary when working in very humid or muddy conditions.