Ballasting MFWD-Equipped Tractors
Ideal tire slippage for MFWD-equipped tractors is 8—12%.
To reduce wheel slip to this level, more weight is needed on the front
than with two-wheel-drive tractors. The ideal weight split is 40%
front, 60% rear, of total tractor weight. In some cases liquid ballast
will be needed in front tires to obtain this weight split.
NOTE: Implement codes are used to determine proper ballast for
stability and steering control. Refer to the implement code in your
implement operator's manual, along with USING IMPLEMENT CODES in this
section, to determine the minimum number of front weights that are
required for your tractor model. In some cases, additional front ballast
is required for optimum field performance. If more assistance is needed,
see your John Deere dealer.
|
|
OUO1078,00001D9-19-20080728
|
|