Preparing Implements
When coupling Category I implements (A) to tractor it may be necessary to widen sway bars to avoid restriction of full hitch elevation.
CQ294916-UN-27NOV13
A - Category I
B - Category II
Category I 3-point hitch (A) is narrower and it is used with smaller implements than those used with Category II (B).Consult the following table to identify the implement category.
Implements for Category II hitches (B) must have upper hole of implement arm at 483 mm (19 in.) above lower pins. Perforate another hole in the upper arm and extend it, if necessary.
|
Category |
Upper arm height |
Clearance between lower pins |
Pin size |
|
|
Lower |
Upper |
|||
|
I |
457 mm (18 in.) |
682.6 mm (26-7/8 in.) |
22 mm (7/8 in.) |
19 mm (3/4 in.) |
|
II |
483 mm (19 in.) |
824 mm (32-7/16 in.) |
28 mm (1-1/8 in.) |
25.4 mm (1 in.) |
|
AG,LT04177,172-19-20131128 |