Checking Roll Over Protective Structure

Check that all parts are correctly mounted. In the event that the roll-over protective structure (ROPS) is removed or its connections loosen, retighten all bolts with the appropriate torque before operating the tractor again.

CQ298641
CQ298641-UN-11DEC13

The protection provided by the Roll-Over Protective Structure will be reduced if the structure suffers structural damage, such as caused by the tractor rolling over, or if the overall shape is altered by welding or by a strong impact. Roll-Over Protective Structure must always be replaced with another in goof condition if subject to any of the irregularities referred to above.

If it is necessary to loosen or remove the Roll-Over Protective Structure to install some equipment to the tractor, tighten attaching bolts (A) to specified torque:
Attaching bolts (A)Torque335 N·m (220lb.-ft.)

Tighten bolts (A) on both sides of radiator.

GB52027,000016A-19-20131211