Attaching Implements to 3-Point Hitch

1. 
   CQ294917-UN-27NOV13

   A - Implement

   B - Hitch Arms

   C - Hitch Pins

   Make sure that the drawbar does not cause interference and, if necessary, move drawbar forward or even remove it. Check to ensure there are no more points of possible interference.

   Avoid sudden pick-up hitch movements by setting draft control lever forward (disengaged position) before coupling an implement to the 3-point hitch.

---




2. Backup tractor in direction of implement (A) so that hitch points are aligned. Set transmission to Park position P and shut off engine before you leave the operator's station.

3. Hook up hitch arms (B) to implement pins (C) and secure using locking pins. First hook up the side without adjusting crank.

   Locking pins can remain in hitch arms while not in use.

4. 
   CQ294918-UN-27NOV13

   To remove center link arm from transport hook press lock (A) of center link arm and turn latch (B).

---




5. Couple center link arm to upper implement arm.

6. Adjust center link arm, leveling arms and sway arms as necessary.

7. 
   CQ294919-UN-27NOV13

   Tractors with Open Operator's Platform

   
   CQ294920-UN-27NOV13

   Cab Tractors

   Use position control lever (A) to raise or lower the implement.

   To avoid personal injury or damage to the machine when coupling up an implement, a quick-coupler or any other implement to tractor 3-point hitch, check complete range of operation to detect possible interference, strangulation or disconnection of power-take-off.

---